Start-up
186
Pos: 26.19 /Überschrif ten/Überschrif ten 2/A-E/A nschluss Beleuc htung @ 33\ mod_125438530 8979_78.doc @ 3 19105 @ 2 @ 1
10.3 Lighting connection
Pos: 26.20 /BA/I nbetriebnahme/ Schwader/Ansc hluss Beleucht ung/Anschluss B eleuchtung Bild S W 2000 @ 36\mod_12607833 64093_78.doc @ 336693 @ @ 1
3
2
1
SW2000005_1
Fig. 128
Pos: 26.21 /BA/I nbetriebnahme/ Schwader/Ansc hluss Beleucht ung/Anschluss B eleuchtung S wadro SW 2000/ 7 00_800_900 @3 6\mod_126078 3798936_78.d oc @ 336718 @ @ 1
The lighting system is connected via the 7-pin connection cable (1).
To do this:
• Insert the 7-pin plug of the connection cable (1) into the relevant socket (2) of the tractor.
• Insert the 7-pin connection cable plug (1) into the appropriate socket (3) of the machine.
• Position the cable so that it will not come in contact with the wheels.
Pos: 26.22 /BA/I nbetriebnahme/ Schwader/Ansc hluss Beleucht ung/Hinweis Ansc hluss am Tr aktor fehlt @ 36\m od_12607843 64405_78.doc @ 336743 @ @ 1
Note
If there is no connection present on the tractor, – request a socket with connection cables from
the spare parts service (Part No.: 0302-068-0)
Pos: 26.23 /BA/I nbetriebnahme/ Schwader/Hin weis Sauberkeit der Stecker und Steckdosen @ 2\ mod_1202399 563131_78.doc @ 59273 @ @ 1
Note
Before inserting the plugs, make certain the plugs and sockets are clean and dry. Dirt and
moisture may result in short circuits!
Pos: 26.24 /BA/--- --Seitenumbruc h------ @ 0\mo d_119617531 1226_0.doc @ 41 65 @ @ 1
To Next Page
Loading...
