Operation
194
Pos: 30.5 /Übersc hriften/Übersc hriften 2/U-Z/Vo nTr ansport in Ar beitsstellung @ 2\mod_120246 6185276_78.d oc @ 59662 @ 2 @ 1
12.2 From transport into working position
Pos: 30.6 /BA/Sich erheit/Gefahr enhinweise/Schw ader/Gefahr Kreis el absen ken SW1400 Plus, SW 2000 @ 22\ mod_12397184 94151_78.doc @ 232724 @ @ 1
DANGER! – Lowering the rotors to the working position
Effect: Danger to life, injuries or damage to the machine.
• Only lower the rotors if you are absolutely sure that neither persons, animals or objects
are in the swivel range of the rotors.
• Only switch on the PTO if the machine is in the working position.
Pos: 30.7 /BA/Bedi enung /Schw ader/Zinken / Zi nkenarme/Zin kenschutze entfern en SW 2000 @ 22\mod_1239 781660816_78. doc @ 233087 @ 3 @ 1
12.2.1 Removing the tine guards from the tine tips
1
2
SW2000012
2 m
Fig. 136
• Remove tine guards (1) from the tines and place in the designated support (2).
Pos: 30.8 /BA/Bedi enung /Schw ader/Kreiselar mes enken/heb en/Kreiselarme se nken SW 200 0 @ 61\mod_1 298386087235_ 78.doc @ 565849 @ 2 @ 1
12.3 Lowering the Rotor Arms into Working Position
SW2000068
1
Fig. 137
• Open the shut-off valve (1) for the auxiliary steering
• Pressurize the hydraulic system
• Switch on the control unit
• Lower rotor (see chapter entitled Medium/Comfort Control Unit "Lowering rotors in
headland position/Lowering all rotors in working position").
Pos: 30.9 /BA/---- -Seitenumbruch--- --- @ 0\mod _1196175311 226_0.doc @ 416 5@ @ 1
To Next Page
Loading...
Need help?
General
