ISOBUS operation
179
Pos: 24.18 /BA/I nfo-Center/CC-I SOBUS-Termin al/CCI-Ladewage n/Hauptmenüs /Hauptmenü 9 I SO-Einstellung en/Menü 9-2 T erminalwechsel @ 83\mod_131 7118279972_ 78.doc @ 72709 3 @ 3 @ 1
9.3.2 Menu 9-2 "Switching between terminals"
Note
• Menu 9-2 appears only if multiple ISO terminals are connected.
• You can use menu 9-2 to switch to the next connected terminal (depending on how many
terminals are connected).
• When the user switches terminals for the first time, the configuration of the machine is
loaded into the next terminal. The loading may take a few minutes. The configuration is
saved in the memory of the next terminal.
Note
The next time a call is made, the machine is no longer available in the previous terminal.
CC000484
9
Fig. 124
• Press function key to access the menu level via the basic screen
• Press function key or to select main menu 9 ( ). The icon is shown inverted
• Press function key to display the menu level 9-2 ( ). The icon is shown in
reverse colours
• Press the key again to switch to the next connected terminal
• Press function key to close the currently displayed menu
• Pressing the key for a little longer calls up the basic screen
Pos: 24.19 /BA/--- --Seitenumbruc h------ @ 0\mo d_119617531 1226_0.doc @ 41 65 @ @ 1