KRONE ISOBUS-Terminal CCI 100
132
Pos: 22.1.37.25 / BA/Info-Center/CC- ISOBUS-Ter minal/CCI-S wadro/Swadro 2 000/Grundbild 1 Kr eiselaushebu ng/Anheben aller Kreisel in die V orgewendestell ung Automati kbetrieb SW 20 00@ 88\mod_13 21434380978_7 8.doc @ 75382 6@ 4 @ 1
8.6.4.3 Raising All Rotors to the Headland Position (Automatic Mode)
Note
The function will not be performed if a rotor is in transport position.
Pressing the function key for raises all rotors to the headland position. The front rotors
are raised first. After a time delay, the middle rotors are raised. After another time delay, the
rear rotors are raised (see also the chapter "Adjusting the Automatic Time <Raise Rotors>").
The function will not be performed if an activated rotor is in transport position.
Lifting of the rotors can be stopped by repeatedly pressing the function key for .
Pos: 22.1.37.26 / BA/Info-Center/CC- ISOBUS-Ter minal/CCI-S wadro/Swadro 2 000/Grundbild 1 Kr eiselaushebu ng/Einstellen der Automati kzeit<Kr eisel hebe n>ÜS / Bild @ 8 8\mod_13214 34458321_78.doc @ 753853 @ 3 @ 1
8.6.5 Adjusting the Automatic Time <Raise Rotors>
F2
F3
F4
F5
F6
F7
F8
F9
F10
F11F11
F12
F1
CCS00057
Fig. 92
Pos: 22.1.37.27 / BA/Info-Center/CC- ISOBUS-Ter minal/CCI-S wadro/Swadro 2 000/Grundbild 1 Kr eiselaushebu ng/Einstellen der Automati kzeit<Kr eisel hebe n>T 1 @ 90\mod_ 13230700252 26_78.doc @ 767142 @ @ 1
Time delay for raising middle rotor (1)
Time delay for raising rear rotor (2)
The set time (time delay) always relates to between the rotors (front / middle or middle / rear).
Pos: 22.1.37.28 / BA/Info-Center/CC- ISOBUS-Ter minal/CCI-S wadro/Swadro 2 000/Grundbild 1 Kr eiselaushebu ng/Scroll-Rad anwählen,springe n,erhöhen bz w.verr ingern,sp eichern @ 88\m od_1321450191 481_78.doc @ 754131 @ @ 1
• Use the scroll wheel to make the required selection (1) for the middle, (2) for the rear
rotor. (The selection box is highlighted in colour.)
• Press the scroll wheel to jump to the selection box (The selection box is highlighted in
colour.)
• Turning the scroll wheel increases or reduces the value.
• Press the scroll wheel to apply the setting and exit the selection box.
Pos: 22.1.37.29 / BA/-----Seiten umbruch------ @ 0\mod_1196175 311226_0.doc @ 4165 @ @ 1