Table of Contents
4
5.5 Electrical power supply.................................................................................................................... 33
5.6 Mounting onto the Tractor................................................................................................................ 33
5.7 PTO shaft......................................................................................................................................... 34
5.7.1 Length adjustment ....................................................................................................................... 34
5.8 Height of tractor lower suspension arms ......................................................................................... 34
6 KRONE operation terminal Gamma....................................................................................................35
6.1 Mounting the control unit ................................................................................................................. 36
6.1.1 Electrical power supply................................................................................................................ 37
6.2 Overview.......................................................................................................................................... 38
6.3 Description of the keys .................................................................................................................... 39
6.4 Operational Readiness .................................................................................................................... 41
6.5 Display Areas on the Screen........................................................................................................... 42
6.5.1 Status line area (I) ....................................................................................................................... 42
6.5.2 Displays in the main window (II) .................................................................................................. 44
6.5.3 Softkeys area (III) ........................................................................................................................ 45
6.5.4 Softkeys area (IV)........................................................................................................................ 46
6.6 "Road Travel" Basic Screen ............................................................................................................ 48
6.7 Basic screen "Lifting the rotors"....................................................................................................... 49
6.7.1 Lowering the Rotors from Transport to Headland Position ......................................................... 49
6.7.1.1 Lowering All Rotors to Headland Position ........................................................................... 49
6.7.2 Lowering the Rotors from the Headland Position to the Working Position.................................. 50
6.7.3 Selecting the Rotors for a Function ............................................................................................. 50
6.7.3.1 Lowering Individual Rotors to Working Position .................................................................. 50
6.7.3.2 Lowering All Rotors to Working Position (Automatic Mode)................................................ 50
6.7.3.3 Adjusting the Automatic Time <Lower Rotors> ................................................................... 51
6.7.4 Raising the Rotors to Headland Position..................................................................................... 52
6.7.4.1 Raising Individual Rotors to Headland Position................................................................... 52
6.7.4.2 Raising All Rotors to Headland Position (Automatic Mode) ................................................ 52
6.7.5 Raising All Rotors from the Headland Position to the Transport Position................................... 53
6.8 Basic screen "Width adjustments"................................................................................................... 54
6.8.1 Working width .............................................................................................................................. 54
6.8.2 Adjust the front working width...................................................................................................... 54
6.8.3 Swath width.................................................................................................................................. 55
6.8.4 Adjusting the Swath Width........................................................................................................... 55
6.8.5 Raise/lower rotors in pairs ........................................................................................................... 56
6.8.5.1 Lowering Rotors to the Working Position in Pairs ............................................................... 56
6.8.5.2 Raising Rotors to the Headland Position in Pairs................................................................ 56
6.9 Basic screen "Working height"......................................................................................................... 57
6.9.1 Adjusting the Working Height of the Rotors................................................................................. 57
6.9.2 Rotor height automatic mode....................................................................................................... 58