Metadata Description
State The state of the layer:
•
Hidden
The
se layers are not shown on the 3D viewer page and
their positions are not used when zooming to extents.
Nothing in these layers can be selected.
•
Visible
These layers are shown on the 3D viewer page and their
positions are used when zooming to extents. Nothing in
these layers can be selected. Empty dxf layers can be set
to visible.
•
Selectable
These layers are shown on the 3D viewer page and their
positions are used when zooming to extents. Objects on
these layers are available to be selected.
Description of fields
Field Option Description
Prefix to
use fo
r
points, Pre-
fix to use
for lines or
Prefix to
use for
closed lines
Editable field The identifier with up to four characters is
added in front of the ID of the imported CAD
points, lines or areas.
Objects to
create when
importing
entities
Vertices and
lines
•
Impo
rts the CAD lines into the job.
•
Creates points at the starting and the
ending coordinates of the imported
line/arc/polyline elements.
Only at ver-
tices
Cr
eates points at the starting and the ending
coordinates of the line/arc/polyline elements.
The elements are not imported.
Only lines Imports only the CAD lines into the job. No
points are created.
Ignore data
at height
Editable field Height values inside the DXF file are consid-
ered invalid and are not converted.
Apply a
height to 2D
data
Check box When this box is checked, a height can be
defined which is then applied to all imported
2D CAD points.
Height to
apply
Editable field Available when Apply a height to 2D data
is checked. The height to apply to 2D CAD
points.
CAD Import
72 Job Menu - Jobs
To Next Page