User Guide Chapter 6 Groups
Rev. 1.30.03.07.r1 Page 99
Recording Groups Live
The [RECORD GROUP] hard-key records the instantaneous look of the
current Stage or Device display by recording all channels or traits at their
current levels. This includes all levels that may be originating from level
setting commands, cues, running effects, or even other groups. The Record
Group command can be executed from any display except Setup.
If an effect is running, the Record Group command captures the effect
channels at the instant the [ENTER] key executes the command.
Recording a channel group live
Follow these example steps to record a simple group of conventional
channels live:
Procedure: Notes:
1. Press [STAGE]
2. Select channels and set Creates look
channel levels
3. Press [RECORD GROUP] [20]
4. Press [ENTER]
Remember that the Record Group function works just like the Record
Cue or Record Submaster function in that it records all levels as they
are currently being output from the console, so be careful that you do
not get more than you bargained for when you record.
To Next Page
Loading...
