User Guide Chapter 8 Macros
Rev. 1.30.03.07.r1 Page 133
Start Channel Check Automatically
This example is a timed macro:
Procedure: Notes:
1. Press [SETUP] (Macro) Opens Macro sub-display
2. Press [4] Menu item 4: Macro Number
3. Enter macro number [6]
4. Press [2] Menu item 2: Record Mode
5. Use the up/down arrow keys
to select "Timed"
6. Press [ENTER]
7. Press [1] Menu item 1: Record Macro
Initiates macro 6 recording
8. Press [STAGE]
9. Press the (More) soft-key
10. Press the (ChnChk) soft-key
11. Press [1] [AT] [FULL] Captures the starting
channel. Specify any desired
check level.
12. Use the right arrow key to Level will show in boxed red
scroll through channels video
13. Press [CLEAR] to stop channel check
14. Press macro key [M6] Ends macro recording
To Next Page
Loading...
