User Guide Chapter 11 Memory Functions
Rev. 1.30.03.07.r1 Page 181
Loading Show Files from a Floppy Disk
To retrieve a show file from a disk and load it into the console RAM, follow
the procedure below.
Procedure: Notes:
1. Press [SETUP]
2. Press (Disk) Opens Disk Menu
3. Press [2] Opens Load File Menu
4. Use the up/down arrow keys to Opens Load File Name box
select file to load Select file with .INN suffix
5. Press [ENTER] Press [CLEAR] to abort
When a show file is loaded to the console it will overwrite the existing
show file in console RAM. Save your existing show files before loading
new files.
Formatting a Floppy Disk
Formatting a floppy disk erases all information recorded on the disk.
Before a floppy disk can be used, it must be formatted on either the console
or an IBM compatible PC.
To format a floppy disk on the console, insert a disk into the disk drive and
follow these steps:
Procedure: Notes:
1. Press [SETUP]
2. Press (Disk) Opens Disk Menu
3. Press [6] Disk Menu Item 6:
Format Disk
4. Press [ENTER] Press [CLEAR] to abort
To Next Page
Loading...
