Chapter 11 Memory Functions
Page 180 Rev. 1.30.03.07.r1
Recording Show Files to a Floppy Disk
File names have a .INN suffix (MYSHOW.INN for example). You can use the
submaster bump buttons or a standard PC keyboard to name the file to be
recorded. Up to 8 characters may be used to specify the file name.
To record show information to a floppy disk on the console, insert a disk
into the disk drive and follow these steps (see Figures 11.1 and 11.2 on
previous page):
Procedure: Notes:
1. Press [SETUP] (Disk) Opens Disk Menu
2. Press [1] Opens Save File Menu
3. Enter the menu item number to Menu items 1 - 9
select type of file(s) file to save.
4. Press [ENTER] Opens Save File Name box
5. Use sub bump buttons to enter a
file name or select existing file by
using the up/down arrow keys
6. Press [ENTER] Press [CLEAR] to abort
Devices, Subs, Cues and Groups will be automatically saved together
once devices have been assigned.
To Next Page
Loading...
