Chapter 4 Submasters
Page 50 Rev. 1.30.03.07.r1
Recording Submasters in Preview
Submasters can be also be created "in the blind" from the Submaster sub-
display of Preview. Follow the steps below as an example:
Procedure: Notes:
1. Press [PREVIEW]
2. Press (SelSub) [#] Creates new sub
3. Press [ENTER] If Sub has already been
recorded, its levels will show.
4. Select channels and set Sub recorded
channel levels
All levels are recorded automatically in the Preview display, it is not
necessary to press the [RECORD SUB] hard-key. If you do use the
[RECORD SUB] key, the active stage levels will be recorded, not the
blind levels.
Editing Submasters in Preview
Follow these steps to edit a previously recorded submaster:
Procedure: Notes:
1. Press [PREVIEW]
2. Press (SelSub) [#] Selects sub
3. Press [ENTER]
4. Select channels and set Sub recorded
new channel levels
To Next Page
Loading...
