Leviton 600 - Colornet Configuration (Innovator Only); Network Remote (Innovator Only)

Chapter 12 System Settings
Page 194 Rev. 1.30.03.07.r1
ColorNet Configuration (Innovator Only)
Follow this example to set the ColorNet option to “On”:
Procedure: Notes:
1. Press [SETUP] Opens the Setup display
2. Press [19] [ENTER] Selects menu item 19:
“ColorNet”
3. Use the up/down arrow keys
to select “On”
4. Press [ENTER] Confirms selection
See
Chapter 14 Alternate Control Interfaces for additional information on
ColorNet.
Network Remote (Innovator Only)
Follow this example to set the Network Remote option to “On”:
Procedure: Notes:
1. Press [SETUP] Opens the Setup display
2. Press [20] [ENTER] Selects menu item 20:
“Network Remote”
3. Use the up/down arrow keys
to select “On”
4. Press [ENTER] Confirms selection
See
Chapter 14 Alternate Control Interfaces for additional information on
using the hand held remote.