Chapter 8 Macros
Page 130 Rev. 1.30.03.07.r1
Editing Macros
Macros may be edited in one of three ways; Insert, Modify or Delete.
To insert a keystroke in a macro:
Procedure: Notes:
1. Press [SETUP] (Macro) Opens Macro sub-display
2. Press [4] Menu item 4: Macro Number
3. Enter macro number to edit 1 - 8
4. Use the arrow keys to select the
portion of macro to perform insert
5. Press [7] Menu item 7: Insert
6. Press the keystroke to be inserted Keystroke inserted, all
following keystrokes are
moved down list
To modify a keystroke in a macro:
Procedure: Notes:
1. Press [SETUP] (Macro) Opens Macro sub-display
2. Press [4] Menu item 4: Macro Number
3. Enter macro number to edit 1 - 8
4. Use the arrow keys to select the
portion of macro to modify
5. Press [8] Menu item 8: Modify
6. Press the new keystroke Keystroke modified.
To delete a keystroke in a macro:
Procedure: Notes:
1. Press [SETUP] (Macro) Opens Macro sub-display
2. Press [4] Menu item 4: Macro Number
3. Enter macro number to edit 1 - 8
4. Use the arrow keys to select the
portion of macro to delete
5. Press [9] to delete Keystroke deleted
To Next Page
Loading...
