User Guide Chapter 12 System Settings
Rev. 1.30.03.07.r1 Page 189
Setting number of Submasters
The console is capable of holding up to 8 pages of submasters. Each page
contains 24 submasters which correspond to the submaster faders. The
total console capacity is 192 submasters.
Follow this example to set the number of submaster pages to four:
Procedure: Notes:
1. Press [SETUP] Opens the Setup display
2. Press [8] [ENTER] Selects menu item
8: “Number of
Submaster pages”
3. Press [4] [ENTER] Valid numbers are 1 to 8
4. Select [1] from Memory re-order Press [CLEAR] to cancel
confirmation box
See
Chapter 4 Submasters
for additional information on using submasters.
Setting number of Macro Pages
A macro is a recorded sequence of commands that may be played back
with the touch of one of the 8 macro hard-keys. The console is capable of
holding up to 64 pages of macros for a console capacity of 500 macros.
Each page contains 8 macros which correspond to the macro keys.
Follow this example to set the number of macro pages available to 20:
Procedure: Notes:
1. Press [SETUP] Opens the Setup display
2. Press [9] [ENTER] Selects menu item
9: “Number of macro pages”
3. Press [20] [ENTER] Valid 1 to 64
4. Select [1] from Memory re-order Press [CLEAR] to cancel
confirmation box
Remember, increasing the number of Channels, Groups, Macros,
Effects, Steps, and Submasters will affect the remaining amount of
available console memory.
To Next Page
Loading...
