User Guide Chapter 12 System Settings
Rev. 1.30.03.07.r1 Page 195
Setting Two Scene / Single Scene Mode
All models of the control console except the Innovator 600 have manual
channel faders. These faders are arranged in two rows of either 24, 48, or
72 faders each. In single scene mode, each fader represents a control
channel. In two scene mode, the channel of the top row are duplicated on
the second row and the A/B playback fader serves as a split-fader to
operate the scenes.
To switch between single scene and two scene mode follow below:
Procedure: Notes:
1. Press [SETUP] Opens the Setup display
2. Press [21] [ENTER] Selects menu item 21:
“TwoScene/SingleScene”
3. Use the up/down arrow keys
to select your choice
4. Press [ENTER] Confirms selection
To Next Page
Loading...
