User Guide Chapter 5 Cues
Rev. 1.30.03.07.r1 Page 83
Playing Back Manual Cues
Cues that are assigned a manual fade time wait to be executed by the
movement of the A/B or C/D playback faders. The fade takes place as you
move the faders along to the completion of their travel. When the faders
reach the top, the fade is complete and is cleared from the fader
automatically. You may reverse the direction of the fade anytime before
you reach the top of the fader travel, but once you get to the top the fade
is complete and cleared from the playback fader. See the previous sections
in this chapter for information on how to record cues.
Follow these example steps to playback a manual cue:
Procedure: Notes:
1. Press [LOAD] [5] Loads manual cue
2. Press [GO]
3. Lower and raise playback faders Cue completes when faders
reach top
4. Repeat steps 2 and 3 for
next manual cue
5. Press [CLEAR] [ENTER] Use the [CLEAR] key above
the cue playback faders
To Next Page
Loading...
