Chapter 5 Cues
Page 66 Rev. 1.30.03.07.r1
Editing Cues in the Preview Display
To edit cues in Preview, just make the changes you want, all changes are
recorded as you make them.
For example: Assume Cue 2 is already recorded with channels 1 thru 10 at
full. To just set channels 5 and 6 to a new level follow below:
Procedure: Notes:
1. Press [PREVIEW]
2. Press (SelCue) [2] [ENTER] Or press [CUE] [2] [ENTER]
3. Press [5] [AND] [6] Selects channels to be edited
4. Press [AT] [75] Cue is automatically recorded
as you enter levels
Cues can also be edited blind from the Tracksheet display. For more
information on using the Tracksheet, please see the
Cue Record Modes
section later in this chapter.
To Next Page
Loading...
