User Guide Chapter 12 System Settings
Rev. 1.30.03.07.r1 Page 183
Chapter 12 System Settings
The Setup display allows you to customize the console settings and execute
certain functions. For example, you can set the number of dimmers and
channels, select and patch automated devices, and perform printing and file
management tasks. Settings remain in memory after the console is turned
off. When console memory is hard cleared, the settings are reset to the
factory defaults. See
Chapter 11 Memory Functions
for more information on
clearing memory.
Some menu items, along with the soft-keys, are explained in greater detail
in relevant chapters.
Chapter 12 includes the following sections:
• Navigating the Setup Display
• Naming the Show
• Naming the File
• Setting number of Dimmers
• Channel Bump/Toggle Button
• Allocating Memory by setting maximum number of channels, submasters,
macros, effects, and groups
• Setting Worklight Level
• Selecting Dimmer Protocol
• Selecting Printer type
• Setting MIDI Configuration Information
• Setting MIDI Device number
• Selecting MIDI transmit mode
• ColorNet Configuration (Innovator Only)
• Network Remote (Innovator Only)
• Setting Two Scene / Single Scene Mode
• Selecting Secondary Video
• Setting the Time and Day
• Soft-key functions in Setup Display
To Next Page
Loading...
