User Guide Chapter 5 Cues
Rev. 1.30.03.07.r1 Page 75
Assigning Macros to Cues
You can assign a recorded macro to a cue to automatically execute the
macro. The specified macro will execute when the cue fade begins.
This feature can be very useful for triggering timed submasters or for
capturing specific channels on the trackball for overriding cue control.
Another useful application is to assign rate control in a cue macro for a cue
or effect that requires it in every performance, this way the rate will always
be ready on the trackball when the cue is initiated.
To assign a macro to a cue using the Cuesheet display:
Procedure: Notes:
1. Press [CUE] [#] (More)
2. Press (Macro) [#]
3. Press [ENTER]
To assign a macro to a cue using the Preview display:
Procedure: Notes:
1. Press [CUE] [#] (More) (More)
2. Press (Macro) [#]
3. Press [ENTER]
To delete a macro from a cue:
Procedure: Notes:
1. Press [CUE] [#] (Macro) Specify NO macro number
2. Press [ENTER]
Please refer to
Chapter 8 Macros
for information on programming and using
macros.
To Next Page
Loading...
