User Guide Chapter 12 System Settings
Rev. 1.30.03.07.r1 Page 185
Naming the Show
Setup menu item 1 provides a way to add an alphanumeric name to a
show. The Show Name only appears in the Setup display and can only be
viewed when the show is in active memory.
For example, to assign a Show Name:
Procedure: Notes:
1. Press [SETUP] Opens the Setup display
2. Press [1] [ENTER] Selects menu item 1:
“Show name”
3. Press the submaster bump buttons or
use a keyboard to enter a show name
4. Press [ENTER] Use the [CLEAR] key to erase
Naming the File
Setup menu item 2 provides a way to specify a DOS style disk file name for
the show in current memory. This name is different from that of the "Show
Name" and must follow naming conventions of a maximum of 8 letters or
numbers. These will appear as "xxxxxxxx.INN" when the disk directory is
viewed on a PC.
For example, to assign a File Name:
Procedure: Notes:
1. Press [SETUP] Opens the Setup display
2. Press [2] [ENTER] Selects menu item 2,
“File name”
3. Press the submaster bump buttons or
use a keyboard to enter a file name
4. Press [ENTER] Use the [CLEAR] key to erase
See
Chapter 11 Memory Functions
.
See
Appendix A Installation
for
information on how to install a keyboard.
To Next Page
Loading...
