User Guide Chapter 5 Cues
Rev. 1.30.03.07.r1 Page 57
Creating a Basic Cue
To create a cue live from the Stage display, you first create the look by
setting channel levels. Then, using the record cue functionality of the
console, you enter the cue number and all required cue attributes. From
this point, pressing the [ENTER] key completes the recording of the cue.
The cue then can be recalled from the playback faders. In-depth examples
are given further in this chapter but here is the general procedure:
Procedure: Notes:
1. Set channel levels using channel faders,
keypad, submasters, groups, etc.
2. Press [RECORD CUE] Initiates recording of a cue
3. Enter cue number
4. Enter cue attributes
5. Press [ENTER] Cue recorded
The [RECORD CUE] hard-key records all levels that may be
originating from level setting commands, other cues, running effects,
active submasters, groups and selected automated device traits.
To Next Page
Loading...
