Leviton 600 - Naming Cues

User Guide Chapter 5 Cues
Rev. 1.30.03.07.r1 Page 69
Naming Cues
You can assign names up to 16 characters in length to cues. These names
can be exclusively numbers, exclusively letters or a combination of letters
and numbers. Names are entered using the submaster bump buttons for
letters and the keypad for numbers. You can also use a standard PC
keyboard to enter names.
In the above chart, the letters x and z are selected by pressing and holding
the w and y keys respectively. A space is added by pressing and holding the
v key. For uppercase letters, press and hold the Leviton Logo hard-key
while selecting letters.
To enter a cue name while in the Preview display:
Procedure: Notes:
1. Press [PREVIEW] [CUE] [5] [ENTER]Or [Preview](SelCue)[5]
2. Press (More) (Name) Enter a name
3. Press [ENTER]
To enter a cue name while in the Cuesheet display:
Procedure: Notes:
1. Press [CUESHEET]
2. Press [CUE] [5] [ENTER] Or use the up/down arrow
keys to select cue number
3. Press (Name) Enter a name.
4. Press [ENTER]
Bump
Button
Alpha
Character
Bump
Button
Alpha
Character
Bump
Button
Alpha
Character
1a9i 17q
2b10j 18r
3c11j 19s
4d12l 20t
5e13m21u
6 f 14 n 22 v (space)
7g15o23wx
8h16p24yz