User Guide Chapter 5 Cues
Rev. 1.30.03.07.r1 Page 71
Clearing Cues
Cues can be individually deleted from the cue list or all cues can be entirely
cleared from the console. Please see the following example procedures.
To delete cues while in the Cuesheet and Tracksheet displays:
Procedure: Notes:
1. Press (Delete)
2. Enter cue you would Command line reads:
like to delete Delete Cue #
3. Press [ENTER]
To delete cues while in the Preview display:
Procedure: Notes:
1. Press (More) Changes soft-key level
2. Press (Delete)
3. Enter cue you would Command line reads:
like to delete Delete Cue #
4. Press [ENTER]
To c lear
all
cues from the control console:
Procedure: Notes:
1. Press [SETUP]
2. Press (More) Changes soft-key level
3. Press (Clear) Clear menu appears
4. Enter [1] “Clear Cues” Warning appears
5. Enter [1] to confirm All cue memory erased
6. Press any display key to exit
See
Chapter 11 Memory Functions
for more information on clearing all
memory from the console.
To Next Page
Loading...
