Leviton 600 - Setting MIDI Configuration Information; Setting MIDI Device Number; Selecting MIDI Transmit Mode

User Guide Chapter 12 System Settings
Rev. 1.30.03.07.r1 Page 193
Setting MIDI Configuration Information
Setting MIDI device number
Follow these example steps to set a MIDI device number:
Procedure: Notes:
1. Press [SETUP] Opens the Setup display
2. Press [17] [ENTER] Selects menu item 17:
“MIDI Device Number”
3. Enter [1] Valid numbers are 0 to 127
4. Press [ENTER] Confirms selection
Selecting MIDI transmit mode
Options: Off, Standard, MSC (MIDI Show Control)
Follow this example to select a MIDI transmit mode:
Procedure: Notes:
1. Press [SETUP] Opens the Setup display
2. Press [18] [ENTER] Selects menu item 18:
“MIDI Transmit Mode”
3. Use the up/down arrow keys
to select transmit mode
4. Press [ENTER] Confirms selection
See
Chapter 14 Alternate Control Interfaces for additional information on
MIDI.