Chapter 6 Groups
Page 108 Rev. 1.30.03.07.r1
Clearing Groups
From the Group sub-display of Preview: To delete an
individual
group press
the (Delete) soft-key.
From the Clear menu of the Setup display: To clear
all
groups follow the
steps below:
Procedure: Notes:
1. Press [SETUP]
2. Press (MORE) Changes soft-key level
3. Press (Clear) Clear menu appears
4. Enter [2] “Clear Groups” Warning appears
5. Enter [1] to confirm All group memory
erased
6. Press any display key to exit
See
Chapter 11 Memory Functions
for more information on clearing
memory.
To Next Page
Loading...
