Chapter 5 Cues
Page 68 Rev. 1.30.03.07.r1
To change the attributes of the currently selected cue, press the key on the
console corresponding to the specific attribute you want to change, then
enter the attribute information followed by the [ENTER] key. Multiple cue
attributes may be entered before the [ENTER] key is pressed. See
Editing Cue Attributes
below for an example procedure.
Editing Cue Attributes
Follow the example below to modify a follow time attribute from the
Cuesheet display:
Procedure: Notes:
1. Press [CUESHEET]
2. Press [CUE] [5] Or use the up/down arrow
keys
3. Press [FOLLOW] [7]
4. Press [ENTER] New Follow time recorded
You can quickly edit cue attributes from the Stage, Preview, Cuesheet
or Tracksheet displays. For example, to edit a fade time, just press
[CUE] [#] [TIME] [#] [ENTER].
Up: assigned Up fade time Eff: assigned Effect
Dwn: assigned Down fade time Mac: assigned Macro
Dly: assigned Delay time Grp: assigned Group
Flw: assigned Follow time
Lnk: assigned Link
Table 5.1 Cuesheet Attributes
To Next Page
Loading...
