User Guide Chapter 7 Effects
Rev. 1.30.03.07.r1 Page 121
Clearing Effects
From the Effect sub-display of Stage or Preview: To delete an
individual
effect press the (DelAll) soft-key.
From the Clear menu of the Setup display: To clear
all
effects follow the
steps below:
Procedure: Notes:
1. Press [SETUP]
2. Press (MORE) Changes soft-key level
3. Press (Clear) Clear menu appears
4. Enter [4] “Clear Effects” Warning appears
5. Enter [1] to confirm All group memory
erased
6. Press any display key to exit
See
Chapter 11 Memory Functions
for more information on clearing
memory.
To Next Page
Loading...
