User Guide Chapter 12 System Settings
Rev. 1.30.03.07.r1 Page 187
Channel Bump/Toggle Buttons
Console models with channel faders have a bump button associated with
the individual channel faders. Menu item 6 allows the user to change the
operation of the channel bump buttons from momentary on/off to
maintained on/off. When set to "off" the bump buttons are normal
momentary flash to full. When set to "on" the channel bump buttons toggle
on and off.
Follow these steps to select a Channel Flash or Toggle mode:
Procedure: Notes:
1. Press [SETUP] Opens the Setup display
2. Press [6] [ENTER] Selects menu item
6: “Ch Bump Tog”
3. Use the up/down arrow keys to select On = Toggle
either On or Off Off = Flash mode
(default)
4. Press [ENTER] Confirms selection
See
Chapter 3 Setting Channel Levels
for more information on using the
channel bump buttons.
To Next Page
Loading...
