User Guide Chapter 8 Macros
Rev. 1.30.03.07.r1 Page 129
Playing Macros
To playback a macro, select the macro page from the Stage or Playback
displays then press the macro key you recorded to:
Procedure: Notes:
1. Press [STAGE] or [PLAYBACK]
2. Press (MP #) Command Line reads:
"Macro Page"
3. Enter macro page
4. Press macro key 1 - 8 Macro executes
If the macro is a timed macro, you must first turn on the "Timed Execute"
option in the Macro sub-display:
Procedure: Notes:
1. Press [SETUP] (Macro) Opens Macro sub-display
2. Press [6] Menu item 6: Timed Execute
3. Use the up/down arrow keys
to select "ON"
4. Press [ENTER]
Assigning Macros to Cues
A macro may be assigned to a cue so that when the cue runs, the macro
will trigger. Macros are assigned to cues from the Preview and Cuesheet
displays: Press [CUE] [#] (More) (Macro) [#] [ENTER].
To delete a macro from a cue:
Press [CUE] [#] (Macro) [ENTER] (specify NO number).
Refer to
Chapter 5 Cues
for information on recording cues.
Assigning Macros to Submasters
A macro may be assigned to a submaster so that when the submaster runs,
the macro will trigger. Macros are assigned to submasters from the Preview
Submaster sub-display, for example:
Procedure: Notes:
1. Press [PREVIEW] (SelSub) [1] [ENTER]
2. Press (More) Changes soft-key level
3. Press (Macro) [7] [ENTER] Macro 7 assigned to sub 1
To Next Page
Loading...
