Chapter 14 Alternate Control Interfaces
Page 208 Rev. 1.30.03.07.r1
HHR
Key Description Example
FULL Sets an item to its [#] [@] [FULL]
maximum level or [#] [FULL]
GO Starts the next cue in the
cue list or resumes
stopped fades
GO TO CUE Begins a Load Cue [GO TO CUE] [#]
command for the C/D [TIME] [#] [ENTER]
playback fader
GROUP Sets a Group at a specified [GROUP] [#] [@] [level]
level. [ENTER]
LAST Used to decrement the channel
number for channel check
MINUS (-) Used to create channel lists [#] [>] [#] [-] [#]
NEXT Used to increment the channel
number for channel check
REC CUE Begins a Record Cue [REC CUE] [#] [TIME]
command [#] [ENTER]
REC GRP Begins a Record Group [REC GROUP] [#] [TIME]
command [#] [ENTER]
REC SUB Begins a Record Submaster [REC SUB] [#] [TIME] [#]
command. [ENTER]
STOP/REV Stops active fade or goes Same as BACK and HOLD
to the previous cue in a buttons on main console
2 second fade
SUB Begins a Submaster editing [SUB] [#] [@] [level]
command or uses a sub [ENTER]
as a group
THRU (>) Used to create channel lists [#] [>] [#]
TIME Used in cue and sub [CUE] [#] [TIME] [#]
editing or Go To Cue [ENTER]
commands
UP Increments level of
captured channels
To Next Page
Loading...
