Chapter 2 Displays
Page 24 Rev. 1.30.03.07.r1
Profile Sub-Display
A profile is a method of customizing an output curve assignment, which
may be assigned any number of times to different dimmers. The Profile
Editor sub-display is available under the (Profil) soft-key of the Setup
display. See
Chapter 9 Patching
for details on the use of this display.
Clear Sub-Display
Pressing (Clear) while in the Setup display will bring up the Clear Menu
which allows you to clear different parts of the console memory. Options
include clearing cues, groups, submasters, effects, macros or all of the
above. Please see
Chapter 11 Memory Functions
for more information.
Real Time Event Sub-Display
The console allows cues to be executed based on a real time clock. Press
(RT Clk) from the Setup display to open this sub-display. From here you
can set the system clock and make assignments of cues for real time
execution. See
Chapter 5 Cues
for more information.
Network Sub-Display (Innovator Only)
Pressing (Netwrk) from the Setup display will bring up the Network sub-
display from which you can set up the console to be run over the ColorNet
Ethernet networking protocol. Refer to
Chapter 14 Alternate Control
Interfaces
for more information.
To Next Page
Loading...
