User Guide Chapter 5 Cues
Rev. 1.30.03.07.r1 Page 77
To record an example multipart cue as in Figure 5.1:
Procedure: Notes:
1. Press [CUESHEET]
2. Press [CUE] [1]
3. Press [PART] [1] [TIME] [5] Adds part 1 with five second
fade time
4. Press [ENTER] Records part 1
5. Press [PART] [2] [TIME] [5] Adds part 2 with two
[DELAY] [3] second fade time and three
second delay
6. Press [GROUP] [55] Assigns group 55 to part 2
7. Press [ENTER] Records part 2
8. Press [PART] [3] [TIME] [5] Adds part 3 with five
[DELAY] [6] second fade time and six
second delay
9. Press [ENTER] Records part 3
10. Press [PART] [4] [TIME] Adds part 4 with split up/
[4] [AND] [6] down fade
times of four and six seconds
11. Press [DELAY] [14] [AND] [25] Adds delay times of 14 and
25 seconds to part 4
12. Press [ENTER] Records part 4
Editing Multipart Cues
Multipart cues are edited using the same procedures as are used for normal
cues.
For example, to edit a multipart cue from Preview:
Procedure: Notes:
1. Press [PREVIEW]
2. Press [CUE] [1] Or press (SELCUE) [1]
3. Press [PART] [3] [ENTER] Or use right/left arrow keys
4. Press [15] [AND] [26] Selects channels to be edited
5. Press [AT] [75] Cue is automatically recorded
as you enter levels in the
Preview display
To Next Page
Loading...
