Chapter 5 Cues
Page 80 Rev. 1.30.03.07.r1
[RATE]
A [RATE] key is located above each pair of playback faders. Pressing the
[RATE] key assigns control of the cue fade rate to the trackball and to the
wheels below the LCD display. Pressing the [RATE] key again releases rate
control and the adjusted fade times remain for the fade. See
Rate Override
section further in this chapter.
Follow the steps below for examples of using the [LOAD], [GO], [HOLD]
and [BACK] keys:
Procedure: Notes:
1. Press [LOAD] [4] In this example Cue 4 is a
timed cue
2. Press [GO] Cue executes
3. Press [HOLD] while cue 4 is running Cue 4 stops
4. Press [HOLD] Cue 4 resumes
5. After cue finishes, press [BACK] Fades back to Cue 3 in
2 seconds
6. Press [BACK] while cue 3 is running Fades to previous cue in
2 seconds
To Next Page
Loading...
