IPECS Release 5
Feature Description & Operation 5.0
2-4
The Station Authorization Codes includes the associated station number and the assigned code.
The structure of the System Authorization code can be set as either ”*”, or “*” the Authorization table
index and the code digits. The later allows duplicate codes to be employed using entry of table index
to provide a unique identification of the entry.
The Administrator and Attendants are permitted to assign any Authorization code including codes for
another station. Normal users may only assign the Station Authorization code for the specific station.
Operation
iPECS Phone
To assign a Station Authorization Code:
1. Press the [
PGM] button.
2. Dial ‘33’, the Authorization Code Program Code.
3. Dial the Station number.
4. Dial the Authorization Code (1 to 12 digits).
5. Press the [
SAVE] button.
To enter an Authorization Code when second dial tone is received:
1. Dial the station number for the Station Authorization code or, for a System Authorization Code,
dial ‘*’ or ‘*’ and the Authorization table index.
2. Dial the corresponding Authorization Code.
3. Place call as normal.
SLT
To assign a Station Authorization code:
1. Lift the handset.
2. Dial SLT Program Mode Entry code ‘561’.
3. Dial Station User Program code ‘33’.
4. Dial Authorization Code (1 to 12 digits).
5. Momentarily press the Hook-switch, receive confirmation tone.
To enter an Authorization Code when second dial tone is received;
1. Dial the station number for the Station Authorization code or, for a System Authorization Code,
dial ’*’ or ‘*’ and the Authorization table index.
2. Dial the corresponding Authorization Code.
3. Momentarily press the Hook-switch.
4. Place call as normal.
DISA
To enter an Authorization Code when second dial tone is received:
1. Dial the station number for a Station Authorization code or, for a System code, ‘*’ or ‘*’ and the
Authorization table index,
2. Dial the corresponding Authorization Code.
3. Place call as normal.
To Next Page
Loading...
