Lucent Technologies DDM-2000 OC-12 Installation Manual

Issue 5 November 2000 
363-206-208
Stand-Alone (Local) Installation Tests for the DDM-2000 OC-12 Multiplexer
Lucent Technologies - Proprietary
See Notice on first page
Set Alarm Attribute Alarm set-attr-alm
Control set-attr-cont
Environment set-attr-env
Date set-date
Feature set-feat
Far End Communications set-fecom
Login set-lgn
Link set-link
Network Element set-ne
OC12 set-oc12
OC3 set-oc3
Password set-passwd
Performance Monitoring
Threshold
Line set-pmthresh-line
Section set-pmthresh-sect
STS1 set-pmthresh-sts1
T3 set-pmthresh-t3
Security set-secu
State T3 set-state-t3
STS1 set-sts1
Synchronization set-sync
T3 set-t3
Switch Function Unit switch-fn
Line switch-line
Path STS1 switch-path-sts1
Synchronization switch-sync
Time Slot Interchange switch-tsi
Table 6-1 DDM-2000 OC-12 Command Codes (Continued)
Command Verb First Modifier Second Modifier Abbreviation

Lucent Technologies DDM-2000 OC-12 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-12
Category	Multiplexer
Language	English