Issue 5 November 2000
363-206-208
Stand-Alone (Local) Installation Tests for the DDM-2000 OC-12 Multiplexer
Lucent Technologies - Proprietary
See Notice on first page
Test Test Alarm test-alm
Auto Turnup test-auto
LED test-led
System Controller test-sysctl
Telemetry Parallel† test-tlm-par
Telemetry Serial test-tlm-ser
Transmission T3 test-trmsn-t3
Toggle tog (Ctrl-t)
Update upd
Table 6-1 Notes:
† Parallel telemetry is not available in OC-12, Release 7.
1. Commands are entered in the form: command verb[-modifier 1][-modifier
2][:TID][:AID][:NDB]; [ ] means may not be required
Table 6-1 DDM-2000 OC-12 Command Codes (Continued)
Command Verb First Modifier Second Modifier Abbreviation