Crane operation
11.5 Crane operation with main boom
Operating manual 3 302 709 en 11 - 97
GMK5150L
12.01.2018
Inspections prior
to starting
operations
When the ignition is turned on, CCS registers the displayed telescoping
status from the current status of the telescoping mechanism and the
previously saved locking and unlocking procedures.
Normally, CCS detects differences between the current and the displayed
telescoping and displays the corresponding error message;
à Malfunctions
in the telescoping mechanism
, p. 14 - 19.
If a malfunction results in values being deleted, CCS can no longer calculate
the current telescoping and will not issue an error message.
• Before the first telescoping, compare the telescoping indicated on the
CCS
display with the current telescoping.
You must enter the current telescoping if the current telescoping is not
displayed correctly;
à Current telescoping, p. 11 - 102.
s
S
Risk of damage to the telescoping mechanism
Before the first telescoping, always check whether the
CCS display is
showing the current telescoping.
This prevents the telescoping mechanism being damaged when telescoping.
To Next Page
Loading...
Need help?
General
