MASSO
MASSO Documentation
INFORMATION: Its a good idea to set to enable "Request Home on startup" and "Request
Home after E-Stop press" option in "Homing settings" window. This will blink a homing request
alarm on the screen to tell the user to home the machine before use and wont let the user run and
gcode without homing the machine.
Wiring the Masso Homing sensor
Information on wiring the Masso Homing sensor
v5.18 - 08 Apr,2021
www.masso.com.au Page 339 of 477
To Next Page
Loading...
