185
PRO Series Live Audio Systems
Owner’s Manual
Chapter 18: Copy And Paste
The PRO Series has a number of copy and paste features to make it easy to copy useful
settings to other areas. You can copy and paste the following:
• Processing areas across channels — see “Using copy and paste” on page 118.
• Parameters through scenes — see “To copy and paste sections to a scene(s)” on
page 117.
• Scenes — see “To create a new scene using the current settings” on page 115.
• Shows — see “To save a show or create a new one from the current settings” on
page 113.
• Events — see “To copy and paste an event” on page 116.
• Presets — see “To create a new preset library from the current one” on page 237.
Channels versus scenes
The fundamental difference between copying through channels and copying through
scenes is that the former is location-based, while the latter can be thought of as being
time-based. However, the areas (and parameters) that are copied across are similar
(see Appendix N "Parameters Affected By Copy And Paste" on page 511).
You can choose which control areas are copied and pasted across scenes via the
Show Editor screen (see “Show editor” on page 117).
To Next Page
Loading...
Need help?
General
