213
PRO Series Live Audio Systems
Owner’s Manual
Chapter 21: Scope (Automation)
This chapter shows you how to use the scope feature of the PRO Series automation to
include/exclude specific parameters on scene store/recall.
Although scope has two functions, recall and store, the emphasis in this chapter is on
recall scope, which will be the most commonly used of them both. Store scope will only
be required in certain circumstances, and even then it must only be used with caution
(see “Using store scope” on page 219).
About scope
Scope lets you define the extent of the automated controls for all channels, buses,
groups, assignable effects and GEQs. To do this it has a Recall Scope screen from
which you can select the controls that are excluded from the scene when it is recalled
and you can also view the current scope status.
About the Recall Scope screen
The Recall Scope screen has a number of type-specific areas, such as Input
channels, Aux Sends, Variable Control Associations and Graphic EQs, which
contain user-selectable parameter sections that you can make ‘out of scene’ on scene
recall.
Elements of the PRO Series Recall Scope screens
To Next Page
Loading...
Need help?
General
