Midas PRO SERIES User Manual

Masters (master channels) 609
PRO Series Live Audio Systems
Owner’s Manual
Comp./Output Dyn
The following diagram shows the parameters of the compressor processing area copied
through scenes.
Note: Only the corrective compressor is shown above, but this is typically the same for
the other compressor modes (adaptive, creative, vintage and shimmer).
Item Control Parameter
1 DYN/[CMP] switch Compressor on/off
2 release control knob Compressor release
3 threshold control
knob
Compressor threshold
4 KNEE pushbutton Compressor knee: hard, medium or soft
5 IN switch Compressor sidechain in/out
6 freq control knob Compressor sidechain frequency
7 WIDTH pushbutton Compressor sidechain width: 2 Oct, 1 Oct or
0.3 Oct
8 ratio/range/[ratio]
control knob
Compressor ratio
9 attack control knob Compressor attack
10 MODE pushbutton Compressor mode: corrective, adaptive, creative,
vintage or shimmer
11 make up control
knob
Compressor gain
Compressor
processing area in
GUI channel strip
3
11
6
7
2
10
9
8
10
9
8
4
3
11
2
5
6
7
1
3
master overview
in GUI channel
strip
5
4
1

Midas PRO SERIES Specifications

General

Series	PRO SERIES
Sample Rate	96 kHz
Word Clock	Yes
Type	Digital Mixing Console
Mix Buses	Up to 24
Connectivity	AES50
Control Surface	Motorized Faders
EQ Bands	4-band Parametric EQ per channel
Effects	Multiple internal effects engines
Frequency Response	20 Hz - 20 kHz
Processing	40-bit floating point