Midas PRO SERIES User Manual

598 Appendix P: Parameters Copied Through Scenes
PRO Series Live Audio Systems
Owner’s Manual
* Not shown in diagram.
Note: Although band 6 is not shown above, the items in the table also apply. The band
has items 2, 3 and 4, and also includes item 7.
Aux Sends (1 to 16)
Not applicable.
Matrix Sends (1 to 16)
The following diagram shows the parameters of the mix processing area copied through
scenes.
Note: Although only matrix sends 1-2 are referenced above, this also applies to all
pairs of matrix sends.
7* SHAPE switch Band 6 shelving mode: bell, soft, low pass 6dB or
low pass 12dB
8 C/O switch
Order of processing: Dyn.
JIns.JEQ or
EQ
JIns.JDyn.
Item Control Parameter
1 ON switch Matrix bus send on/off
2 level/pan control
knob
Bus level, or pan when bus is linked
3 PRE switch Pre-fader on/off
4 level control knob Bus level
Item Control Parameter
1
3
1
3
2
1
3
1
3
4
4
4
2
Matrix buses
processing
area in GUI
channel strip

Midas PRO SERIES Specifications

General

Series	PRO SERIES
Sample Rate	96 kHz
Word Clock	Yes
Type	Digital Mixing Console
Mix Buses	Up to 24
Connectivity	AES50
Control Surface	Motorized Faders
EQ Bands	4-band Parametric EQ per channel
Effects	Multiple internal effects engines
Frequency Response	20 Hz - 20 kHz
Processing	40-bit floating point