Midas PRO SERIES User Manual

262 Chapter 28: Delay Compensation (Latency)
PRO Series Live Audio Systems
Owner’s Manual
Monitor mix (low latency)
The following table shows the delay compensation settings for this mix.
The following signal path examples all measure the same latency of 176 samples at
96kHz = 1.83ms:
• FOH XLR – IP – MAST – XLR
• XLR – IP – MAST – XLR
• XLR – IP – MTX – XLR
• XLR – IP – MAST – MTX – XLR
• XLR – IP – AS – XLR
• XLR – MAST DI (Input) – XLR
• XLR – MTX DI (Input) – XLR
• XLR – AS DI – AS – XLR
• XLR – AR (Input) – MAST – XLR
• XLR – AR (Input) – MAST – MTX – XLR
• XLR – AR (Input) – AS – XLR
Option On/off status
Master to Matrix Post-processing Off
Input Channels
Insert Off
Aux Sends
Monitor Mode (Align with Masters)
Insert
Send-FZ-Return
Graphic EQ
On
Off
Off
Off
Master and Matrix
Insert
Graphic EQ
Off
Off

Midas PRO SERIES Specifications

General

Series	PRO SERIES
Sample Rate	96 kHz
Word Clock	Yes
Type	Digital Mixing Console
Mix Buses	Up to 24
Connectivity	AES50
Control Surface	Motorized Faders
EQ Bands	4-band Parametric EQ per channel
Effects	Multiple internal effects engines
Frequency Response	20 Hz - 20 kHz
Processing	40-bit floating point