511
PRO Series Live Audio Systems
Owner’s Manual
Appendix N: Parameters Affected By
Copy And Paste
This appendix shows the input and output channel parameters affected by copy and
paste operations, which are selected via the copy and paste buttons on the GUI (see
“Using copy and paste” on page 118).
The structure of this appendix is intended to follow the way that copy and paste
operates, that is, by channel or processing area.
Note: Some of the GUI displays in this appendix may look slightly different to the ones
on the PRO Series Control Centre you are using, as they may be taken from a different
type of PRO Series Live Audio System. For example, the PRO3 doesn’t have a
Matrix 9 - 16 section in the GUI channel strip. However, all of the parameters affected
by copy and paste still apply.
Overview
The following table provides a quick reference for finding the copy and paste
parameters per channel in this appendix.
Control
area
Inputs Auxes Returns Matrices Masters
Config-
uration
“Configuration
” on page 512
“Configuration
” on page 520
“Configuration
” on page 526
“Configuration
” on page 529
“Configuration
” on page 534
Comp-
ressor
“Compressor”
on page 514
“Compressor”
on page 521
N/A “Compressor”
on page 530
“Compressor”
on page 535
Gate “Gate” on
page 516
N/A N/A N/A N/A
EQ
(GEQ)
“EQ” on
page 517
“EQ (GEQ)” on
page 522
N/A “EQ (GEQ)” on
page 531
“EQ (GEQ)” on
page 536
Bus
sends
“Bus sends” on
page 518
“Bus sends” on
page 524
“Bus sends” on
page 527
N/A N/A
Master
routing
/fader
section
“Master
routing” on
page 519
“Master
routing” on
page 525
“Master
routing” on
page 528
“Fader section”
on page 533
“Master
routing” on
page 538
To Next Page
Loading...
Need help?
General
