Matrices 495
PRO Series Live Audio Systems
Owner’s Manual
DYN (dynamic) safe
The following diagram details the matrix parameters protected by the DYN safe. Only
the corrective compressor is shown, but this is typically the same for the other
compressor modes (adaptive, creative, vintage and shimmer).
Item Control Parameter
1 DYN/[CMP] switch Compressor on/off
2 release control knob Compressor release
3 threshold control
knob
Compressor threshold
4 KNEE pushbutton Compressor knee selector: hard, medium and soft
5 IN switch Compressor sidechain in/out
6 freq control knob Compressor sidechain frequency
7 WIDTH pushbutton Compressor sidechain width selector: 2 Oct, 1 Oct
and 0.3 Oct
8 ratio/range/[ratio]
control knob
Compressor ratio
9 attack control knob Compressor attack
10 MODE pushbutton Compressor mode selector — corrective, adaptive,
creative, vintage or shimmer
11 make up control
knob
Compressor gain