Midas PRO SERIES

379
PRO Series Live Audio Systems
Owner’s Manual
Appendix E: I/O Modules
There are three module slots (to the right of the rear panel of the PRO6) into which any
combination of the following modules can be fitted:
• DL441 analogue input module; see “DL441 analogue input module” on page 380.
• DL442 analogue output module; see “DL442 analogue output module” on page 381.
• DL443 analogue insert input/output module; see “DL443 analogue Jack I/O module”
on page 382.
• DL444 analogue D-type input/output module; see “DL444 analogue D-type I/O
module” on page 384.
• DL452 digital in/out (AES/EBU) module; see “DL452 digital I/O module” on
page 389.
Details of how to replace a module can be found in Appendix F “Replacing A Module”.