Midas PRO SERIES User Manual

430 Appendix K: Parameters Affected By Scope
PRO Series Live Audio Systems
Owner’s Manual
Matrix send
The following diagram details the scoped matrix send parameters in the input channels.
Although it only shows matrix buses 1 to 8, it also applies to matrix buses 9 to 16
(PRO6 and PRO9 only).
* Bus send levels/panning can also be adjusted via the input channel overview
(GUI channel strip) by using drag in the aux and matrix panels.
You can scope individual bus sends. In column B (All), all sends are affected, and in
column F (Busses), individual sends can be scoped.
ABC E DFG H
Item Parameter
1 Send level* N/A Yes N/A N/A N/A Yes N/A N/A
2 Send pan*
N/A Yes N/A N/A N/A Yes N/A N/A
3 Send pre-fader on/off
N/A Yes N/A N/A N/A Yes N/A N/A
4 Send on/off
N/A Yes N/A N/A N/A Yes N/A N/A
A
B
C
D
E
F
G
H
4
3
4
3
1/2
4
3
4
3
4
3
4
1
3
GUI input
fast strip
Matrix buses
processing area in
GUI channel strip

Midas PRO SERIES Specifications

General

Series	PRO SERIES
Sample Rate	96 kHz
Word Clock	Yes
Type	Digital Mixing Console
Mix Buses	Up to 24
Connectivity	AES50
Control Surface	Motorized Faders
EQ Bands	4-band Parametric EQ per channel
Effects	Multiple internal effects engines
Frequency Response	20 Hz - 20 kHz
Processing	40-bit floating point