Midas PRO SERIES User Manual

318 Chapter 31: Outputs
PRO Series Live Audio Systems
Owner’s Manual
Figure 38: Processing areas available from the master overview display
Output metering
Signal level monitoring of the outputs is only available on the GUI via both default
screens, Overview and Meters. These screens have meters, which look similar to the
ones in the input fast strips on the control surface. For more details, see “Input
metering” on page 282 and “GUI” on page 30.
EQ
Insert and
Configuration
Fader
master overview
Compressor
Matrix buses
This section is not
available on the
PRO3, as it only has
matrices 1 to 8
Although mtx
sends 9-16 are
not shown
(PRO6 and PRO9
only), their
display is similar
to above

Midas PRO SERIES Specifications

General

Series	PRO SERIES
Sample Rate	96 kHz
Word Clock	Yes
Type	Digital Mixing Console
Mix Buses	Up to 24
Connectivity	AES50
Control Surface	Motorized Faders
EQ Bands	4-band Parametric EQ per channel
Effects	Multiple internal effects engines
Frequency Response	20 Hz - 20 kHz
Processing	40-bit floating point