248 Chapter 27: Changing The User Settings
PRO Series Live Audio Systems
Owner’s Manual
Configuring a virtual soundcheck
The Virtual Soundcheck option of the Preferences screen
lets you set the record and playback options for a virtual
soundcheck.
•In the Record section:
• All Dir. Out Pre-processing — switches all the direct
outputs to pre-processing.
• Unmute all Dir. Out — unmutes all direct outputs.
• Mute all Dir. Out — mutes all direct outputs.
• Set All Dir. Out Gains to 0dB — sets all direct output gains to 0dB.
•In the Playback section:
• Input Channel Source — lets you select the input channel source as Normal or
Tape Return.
• Enable all Tape Returns — enables all tape returns.
• Disable all Tape Returns — disables all tape returns.
Restoring the PRO Series defaults
Caution:
The Restore Default Preferences button will reset all console
preferences, and must be used with great caution. To alert you of
the drastic consequences of operating this button, a WARNING
window appears.
Caution:
The Restore Default Globals button resets all console defaults,
including patching and I/O set-up, and must be used with great
caution. To alert you to the drastic consequences of operating this
button, a WARNING window appears.
You can restore console defaults by using the options in the
Restore section of the Preferences screen. However, these
options must be used with care.
>> To reset console preferences to default
Open the Preferences screen and click Restore Default Preferences. Acknowledge
the warning window (see Cautions above).
>> To reset all console settings to default
Open the Preferences screen and click Restore Default Globals. Acknowledge the
warning window (see Cautions above).
Checking the PRO Series build information
This section, which is predominantly a service-only feature,
shows the current build and host software versions of the PRO
Series Live Audio Systems equipment.
To Next Page
Loading...
Need help?
General
