Midas PRO SERIES

582 Appendix P: Parameters Copied Through Scenes
PRO Series Live Audio Systems
Owner’s Manual
Inputs (input channels)
This section shows you which parameters for each of the input channels are affected by
copy through scenes.
Config sections
The following diagram shows the input channel configuration processing area
parameters copied through scenes.
Item Control Parameter
1 gain trim control
knob
Digital trim level
2
Ø switch
Phase on/off switch
3 Control knob Direct output level
4 MODE switch Direct output tap-off point: “Post-fade and mute”,
“Pre-mute, pre-processing” and
“Pre-mute, post-processing”
5 stage box control
knob*
Remote amplifier level
6 30Hz switch* 30Hz filter on/off
7 delay control knob Delay time
8 C/O switch
Order of processing: Dyn.
JIns.JEQ or
EQ
JIns.JDyn.
9 48V switch* 48V phantom voltage on/off
6
5
1
1
9
7
8
2
11
10
1/5
3
4
5
3
1
2
input channel
overview in GUI
channel strip
Configuration processing
area in GUI channel strip
and GUI input fast strip
8
10
9
9